How To Clean Dyson Ball Vacuum

The Dyson Ball Vacuum is a very popular vacuum cleaner, and it’s easy to see why. It has an impressive range of features that make cleaning your home easier than ever before thanks to the versatile cleaning it offers.

The Dyson Ball vacuum cleaner is designed for a busy household with its unique ball-shaped design. This shape allows you to clean under furniture without having to bend down or lift up objects.

The Dyson Ball Vacuum also comes with a number of useful accessories including a crevice tool, dusting brush, flexible hose, detachable nozzle, and floor tool. With this in mind, we are going to be looking at how you can go about cleaning your Dyson Ball vacuum in the most efficient way possible. Let’s get started.

What Materials Will You Need To Clean Your Dyson Ball Vacuum?

The first thing you need to do when cleaning any piece of equipment is to check what materials you have available. These items will make it much easier to get to cleaning.  So, with that in mind, let’s take a look at what you’ll need to clean your Dyson Ball vacuum.

A Brush – This is probably the most important accessory to have when using your Dyson Ball vacuum. Most people use their brushes as a substitute for rags, however, if you want to use them properly then you’ll need to invest in some good quality brushes. Look for a brush that is soft enough to pick up the smallest particles, but strong enough to withstand heavy usage.

A Hose – When cleaning your Dyson vacuum, you’ll need to attach the hose to the back of the machine. Make sure that you buy a vacuum hose that is long enough to reach every corner of your room.

A Floor Tool – This is used to remove stubborn dirt and grime from hard surfaces like tiles, wood floors, and linoleum. It’s usually attached to the end of the hose and can be removed if needed.

Detachable Nozzle – The nozzles on the Dyson Ball vacuum are removable. This makes it much easier to clean the nozzle itself rather than trying to clean it while it’s still connected to the rest of the machine.

A Crevice Tool – This is a small tool that is used to clean around electrical sockets, light switches, and other places where dirt collects. It’s not always necessary, but it’s nice to have just in case.

Dust Bag – Finally, you’ll need a dust bag. These are used to collect the dust and dirt that falls through the air during vacuuming. They’re usually disposable, but if you want to save money then you could consider buying reusable ones instead. These bags come in all shapes and sizes, so there should be one that fits perfectly into your machine. They’re made from a high-quality material, which means they won’t tear easily, and they’ll last longer than cheaper alternatives.

How To Clean Your Dyson Ball Vacuum

Now that you’ve got all the tools you require you can start cleaning your Dyson vacuum! Let’s take a look at each element of cleaning via this step-by-step guide.

How To Clean Dyson Ball Vacuum

Emptying The Vacuum Canister

To empty your Dyson vacuum, simply pull out the filter and place it in the trash bin. Then press the button marked “empty” and wait until the machine finishes emptying the canister. Once the canister is empty you can replace the filter with the new one included in the box.

Cleaning The Dyson Vacuum Filters

When you first get your Dyson vacuum, you’ll notice that the filter looks quite dirty. This is because it hasn’t been cleaned since the day you bought it. You’ll need to remove the old filter before you can put the new one in.

Start by removing the two screws holding the front panel together. Now lift off the cover and slide it towards you. Remove the filter by pulling it upwards.

Clean the inside of the washable filter by running warm water over it. If you don’t have any water, then you can run the machine without the filter in place. Just make sure that you turn it off once you finish cleaning it.

Replace the filter into its original position and screw the front panel back onto the body of the machine.

Cleaning The Motor

The motor is located underneath the main unit. To access this part you’ll need to remove the bottom plate which holds the motor in place.

Once you’ve removed the bottom plate, you should see four plastic tabs that hold the motor in place. Simply push these tabs up and away from the motor to release it.

Remove the top cover and wipe down the motor using a damp cloth (with either cold water or warm water) or a sponge. Wipe the entire surface of the motor, including the sides and the base.

If there are any parts sticking out of the motor, you may need to use an electric drill to gently pry them free.

Replacing The Top Cover

After you’ve finished cleaning the motor you’ll need to replace the top cover. Start by lifting the bottom edge of the cover and sliding it towards you.

Next, tilt the cover so that it lies flat against the body of the machine and slide it back into place.

Finally, reattach the two screws that held the cover in place.

Cleaning The Wheels

Most Dyson Ball vacuums come with three wheels. One wheel is located near the handle for pushing the vacuum around, while the other two wheels are located on either side of the cleaner head. The wheels will be covered in dust and grime after being used for years.

You’ll need to remove the wheels and wash them thoroughly. A simple solution would be to fill a bucket with hot water and add some dish soap. Soak the wheels for about ten minutes and let them soak overnight.

You can also use an old toothbrush to scrub the wheels clean and get rid of any excess debris. You can also use a damp microfiber cloth. Be careful not to scratch the paint as this could cause damage to the machine. If you opt for the damp microfiber cloth, make sure that everything is completely dry before you move on to the next step.

Once the wheels have been washed, they can be replaced (but make sure that they are completely dry first). First, remove the two screws that hold the wheels in place.

Next, slide the wheels out of their sockets. Finally, rinse the wheels under cold water and dry them completely. Replace the wheels and reattach the two screws.

Cleaning The Brush Rollers

Dyson Ball vacuums usually include two brush rollers. These brushes help keep the carpet and floor clean by picking up dirt particles as the vacuum moves along.

To clean the rollers, simply take the machine apart and wash each roller individually. Use a soft-bristled brush to clean the rollers. Rinse them well and allow them to air dry.

You might find that the brush roller of the Dyson vacuum gets clogged up at times. There could be various reasons for this, such as an accumulation of pet hair.

When one of the rollers starts to get clogged with hair or debris, you can easily replace it by unscrewing the roller and taking it out. Once you have removed all of the hair, and the new roller has been installed, you can reassemble the machine.

Caring For Your Dyson Ball Vacuum

Your Dyson vacuum cleaner is going to last longer if you follow a few simple maintenance tips. Here’s how to care for your Dyson Ball:

  • Always store your vacuum upright. This prevents the suction power from becoming weakened over time.
  • Never put a wet towel or a damp cloth in the vacuum bag. Doing so will reduce the effectiveness of the filter system.
  • Make sure to keep the Dyson filters clean. If you notice any build-up of lint or dust in the filter area, you should clean it immediately.
  •  When vacuuming, always start at the center of the room and work your way outward. This helps prevent the accumulation of dust in corners and crevices.
  • Make sure to empty the dust canister every week. You don’t want to leave dirty dust bunnies inside your vacuum.
  • Don’t overload the vacuum. Overloading the vacuum can weaken its suction power.
  • Avoid using harsh chemicals like bleach when cleaning your Dyson Ball. Bleach can corrode parts of the machine.
  • Do not use a steam mop with your Dyson Ball. Steam mops tend to make the vacuum lose suction power.
  • Never operate the Dyson Ball vacuum without the lid closed. Doing so can lead to overheating, which may result in the destruction of the motor.
  • Change the belt regularly. Changing the belt once per month will extend the life of the machine.

Final Thoughts

When it comes to cleaning your Dyson Ball vacuum, or any Dyson vacuum for that matter, there are many different ways to go about doing it. The best method depends on what type of surface you’re cleaning.

Some surfaces require more effort than others. Hopefully, our guide has given you the information that you will need to keep your vacuum clean and well maintained for years to come!