Carpet cleaning is important because it helps remove dirt and dust from your home. If you don’t clean your carpet regularly, it can become dirty and smelly. Carpets also trap allergens such as pollen and dander. This can cause allergies or asthma attacks.
A good rule of thumb is to vacuum at least once every two weeks. If you notice stains or odors, you can try using a steam cleaner or dry shampoo. You may want to invest in a professional deep-cleaning service if the problem persists.
The Bissell Proheat Pet is a carpet cleaner with amazing capabilities. With the Bissell carpet cleaner you can remove ground in dirt, lift and remove hair, stains, clean upholstery, and pet stains in heavy traffic areas.
The Bissell carpet cleaner pushes hot water and cleaning solution through its water tank and spray water compartment, cleaning your carpet to the best of its ability.
It’s ideal for high traffic areas, as well as areas where pets may be. It will spray water through the rubber nozzle, using the water tank to clean and rinse hard floors and carpets. Simply pour hot water into the formula tank, along with a cleaning solution and get cleaning that new carpet!
But, if you want to find out more about how to use the Bissell Proheat Pet vacuum, keep on reading!
What Is The Bissell Proheat Pet?
The Bissell ProHeat Pet is an upright vacuum that comes with a powerful motor and brush roll for superior suction. It has a 2-stage filtration system that removes up to 99% of bacteria, mold spores, pollen, and other particles. It has a HEPA filter that traps larger particles like dust mites.
It has a large capacity tank that holds about 15 cups of water. It has a removable washable filter bag that makes emptying easier. The bag is easy to replace so you won’t have to empty it often.
It also has a high-pressure nozzle that provides more power than low-pressure nozzles. It has a dual cyclone that separates dust and debris from air. There are two filters on this model: one for regular cleaning and another for allergy sufferers.
How Does The Bissell ProHeat Pet Work?
This vacuum uses a combination of heat and suction to loosen stubborn messes. It heats up to 130 degrees Fahrenheit to help break down even tough stains. When the machine detects a stain, it will automatically switch to “heating mode.”
You can choose between three different settings: normal, quick, and turbo. Normal is the default setting. Quick allows you to quickly change modes without having to wait for the machine to cool off. Turbo switches back to heating mode when the machine senses a hard spot.
You can also adjust the temperature by pressing the button on the front of the machine.
Pros
Easy To Use
It’s very simple to operate. Just press start and then select the desired cleaning level. Press again to turn the unit on. To stop, push the button again.
High Suction Power
The ProHeat Pet has a powerful motor that generates 110 pounds of suction per minute. That means it pulls in more dirt and debris than most carpet cleaners.
High Capacity Tank
The tank holds approximately 15 cups of water. This is enough to get through thick carpets and rugs.
HEPA Filter
The HEPA filter captures up to 99% of airborne particles including pollen, dust mites, and other allergens.
Cons
Noisy Motor
The motor is noisy but not unbearable. You might hear some grinding noises while operating the machine.
Not Waterproof
If you plan to take the machine outside, make sure you cover the hose with plastic wrap to prevent leaks.
How To Use Bissell Proheat pet
To use the Bissell carpet cleaner for carpet cleaning, pre spray your carpet with stain remover. This will help treat high traffic areas with ground in dirt and stains. Once this is set, this will make the cleaning process easier for you.
Now, it’s time to prep your machine.
Lift the water tank handle, at the front of the Bissell proheat pet cleaner. Take the water tank out using the handle on the tank lid.
Lift the top section out, and you will see a hole in this section. This is where the warm water will go, and you will see the flow indicator filter, too. Dirty water will also flush through this area for it to work properly. Fill this with warm water, and put it back onto the water tank.
Remove the solution tank from the back of the Bissell proheat, and pour in hot tap water, as well as your cleaning solution. The instructions will be on the back of the cleaning solution bottle, and you should make sure it is not on the wrong setting. This will make its cleaning effectiveness better.
Set the dial on the front of the Bissell proheat to ‘floor cleaning’ rather than the other options. Always make sure your Bissell product is set to the correct settings before you start cleaning your carpet.
Pay attention to the dial near the top of the Bissell proheat, as you can choose how intense you want the cleaning to be, as well as how much cleaning formula should be released.
Remove all furniture and obstructions from the area you want to clean, whether this is hard floors, or a new carpet.
Start up your Bissell product, and clean the areas furthest from where you are standing. This will ensure that you do not step on the clean, wet areas.
When cleaning, turn on the heating button. The heatwave technology will kick in, so you can use this carpet as a deep cleaner that also helps the carpet dry as you are going along.
When cleaning, step on the lever at the bottom, and push it. This will release the cleaning formula mixed with warm water. Depress this trigger when the Bissell proheat is away from you. Then release the trigger button as you start to bring it back towards you. Repeat until there is no more water being pulled up from the wet carpet.
Use your dial to switch to the tool section when you are cleaning harder-to-reach areas.
Allow the carpet to dry completely before you put your furniture back.
How To Change The Water Tank
Look at the dirty water that you have got up from your carpets! When it is full, you should empty it. Turn the Bissell proheat off, and lift the handle to release the water tank.
Refill this water tank with hot tap water, and mix with any cleaning solution. You’re now ready to clean again!
Final Thoughts
It’s easy to use a Bissell proheat. The carpet cleaner is effective for cleaning most dirt, hair, grime, and stains from your carpets, as well as hard wood. The Bissell proheat is ideal for pets, because it can remove hair, as well as wipe stains, rinse carpets, and generally clean.
